ALLU PROCESSORS

PROCESSOR 300

With a working depth of 3 meters, the Processor 300 HD is designed to be durable. It’s made from wear-resistant steel, with a stem that’s engineered to be strong, streamlined and lightweight. 

Working to a depth of 3 meters and with a weight of 2,095 kg (+400 kg fabricated mount plate), the Processor 300 HD is designed to be durable. It’s made from wear-resistant steel, with a stem that’s engineered to be strong, streamlined and lightweight.

Powered by the excavator's hydraulic system and benefitting from its ability to reach difficult or soft areas, the Processor 300 HD can mix materials everywhere the excavator goes.

Binders or chemical agents are delivered to the area of the highest mixing shear by an attached 80-mm diameter pipe, injected via nozzle located between the mixing drums.

The attachment is equipped with automatic torque adjustment valves between the two hydraulic motors, drum rpm and temperature sensors as well as sensors for oil leakage detection inside the frame construction. The excavator operator controls the rotational direction of the drums to adjust for most effective mixing.

2m and 3m extension tubes are also available as options for added working depth.

PROCESSOR 500

With a working depth of 5 meters, and a heavier weight, the Processor 500 HD provides ultimate durability. Despite its strength, the wear-resistant steel stem is both nimble and streamlined.

Working to a depth of 5 meters and with a weight of 2,445 kg (+400 kg fabricated mount plate), the Processor 500 HD is both durable and strong.

Despite its strength, the wear-resistant steel stem is both nimble and streamlined. Powered by the excavator's hydraulic system and benefitting from its ability to reach difficult or soft areas, the Processor 500 HD can mix materials everywhere the excavator goes.

Binders or chemical agents are delivered to the area of the highest mixing shear by an attached 80-mm diameter pipe, injected via nozzle located between the mixing drums.

The attachment is equipped with automatic torque adjustment valves between the two hydraulic motors, drum rpm and temperature sensors as well as sensors for oil leakage detection inside the frame construction. The excavator operator controls the rotational direction of the drums to adjust for most effective mixing.

2m and 3m extension tubes are also available as options for added working depth.

© 2019 by Keystone Drill, Inc. Designed by PrecisionBS.com

Corporate Headquarters

184 Alisa Street

Somerset, PA 15501

800-221-0586

Branch Locations

12655 Route 536
Punxsutawney, PA 15767
800-626-2298

315 Zane Grey Road
Norwich, OH 43767
800-628-4135

@2019 Keystone Drill, Inc. Designed by Precision Business Solutions