top of page

ROTARY DRILLS

TH 60 Water Well Rig

​

Built to the highest standards, the TH60 has a long history for robust and reliable performance.  This top-head drive PTO drill rig has a strong, mid-weight design that’s ideal for waterwell, dewatering, geothermal, uranium drilling and many more

deep-hole applications.

 

•    Strong derrick
•    Tough mainframe
•    Intelligent air regulation
•    Retractable drill table
•    Console and platform
•    Rotary head
•    Compressor

 

 

​

Rotary and DTH drilling with 40,000 lb (18,144 kg) or 70,000 lb (31,751 kg) of pullback force

TH-60 photoshop.jpg

Epiroc DM30 II

​

  • A spacious one piece FOPS (Falling Object Protective Structure) rated cab with electric over hydraulic controls that are common with the DM series, makes it easy to operate, especially for drillers who have experience in other DM  Series machines.

​

  • The DM 30 II is designed for mining and the structural components will hold up to the heavy duty cycles.

​

  •  For single pass applications the DM30 II can achieve a clean hole depth of 7.9 m (26 ft) and for multi pass depth can achieve depths of up to  44.5 m (146 ft).

​

  • The DM30 II compact design allows for easy transport between benches or even between mine properties.

​

Pulldown: 30,000 lbf (133 kN)

Rotation: 5,400 ft-lb (7,321 N-m)

Air: 900 – 1050 cfm @ 110 psi • 900 – 1050 cfm @ 350 psi

Drill Pipe Size: 30 ft / (9.1 m) x 4.5 in to 5.5 in / (114 to 140 mm)

Depth: 148 ft (45.1 m)

Hole Diameter: 5.5 in – 7-7/8 in (140 mm – 200 mm)

 

​

Also available:


• Drill Rod
• Stabilizers
• Subs
• Floating Subs
• Adapters
• Drilling Fluid

DM30 II.jpg
star iron.png

Epiroc DM45 Blasthole Drill

​

  • Cab design allows a direct line of sight from the operator's seat to the drill table

  • The engine and air end combinations are designed to deliver optimum air and horsepower to meet the toughest drilling conditions without sacrificing power

  • More efficient feed system due to lower flows which results in reduced pressure drop

  • Available in both high pressure and low pressure models to fit your drilling needs

 

Pulldown:  45,000 lb (20,400 kg)
Rotation:  6,000 ft-lb (8,134 N-m)
Air:  900 - 1200 cfm @ 110 psi
        900 -1070 cfm @ 350 psi

Drill Pipe Size:  30 ft / (9.1 m) x 4.5 in to 7 in / (114 to 178 mm)
Depth:  90 to 175 ft (27 - 53 m)
Hole Diameter:  5 in - 10 in (127 mm - 254 mm)

Also available:


• Drill Rod
• Stabilizers
• Subs
• Floating Subs
• Adapters
• Drilling Fluid

DM45.jpg
star iron.png
bottom of page